Our cylinder assembly is NiSiC coated with ductile iron piston rings to make it durable and the cylinder assembly of chainsaw parts includes piston, rings, piston pin, circlips and cylinder.It use to 2 stroke chainsaw.
4 Roll CNC Production Line, this production line including upload device, feeding table, CNC four roll plate rolling machine, lifting device and discharging system etc.
The idler is used to support the track shoe Assy and guide the winding of the track shoe Assy. The rim of the idler can jam the outer edge of the track link to prevent lateral shedding, and tighten the track through the tensioning buffer connected to miti
Reanin-K2000 is a professional, inexpensive pu spray foam machine, mainly used for two components polyurethane spraying and injection, such as wall and roof spray insulation, cold storage insulation, and refrigerator pouring etc.
Production Introduction This Abrasive 5× 3/32× 7/8(125x2.5X22mm)Flat Type 41 Resin Bonded Fiberglass Reinforced Metal Cutting Disc is made by Aluminum Oxide abrasive material , Resin Bonded Fiberglass nets . This cutting wheel 5× 3/32× 7/8(125x2.5X22mm) h
The calibrated tensile force values are all tested under the conditions of cement strength of 260 ~ 300 kgs/cm2, and the maximum value of the safety load must not exceed 25% of the calibrated value.
Model: 92/188 Conical Twin Screw Extruder Designed material: PVCOutput capacity: 600-900kg/h (depends on the formulation, processing and working condition)Remarks: machine model is adjustable according to different capacity requirements
We use a full range of CNC machining centers ,large gantry milling machines,vertical milling machine ,CNC engraving Machines electri spark(EDM),wire-cutters,etc.
RuiXing precision provide fully Aluminum machining service. Coupled with the ability to handle secondary processes and surface treatment, RuiXing can be your One-stop-shop for CNC machined parts.
Central air conditioners are widely used by office, supermarket and other big buildings. The evaporator, condenser and compressor are the main parts of the air conditioner.
The control system has simple control and electronic centralized control, which can realize button control and long-distance remote control, and can also be installed with far-infrared sensors for self-control.
Smoke produced in production are captured into mobile smoke purifier via extraction hood in the effect of fan attraction, will go through the first fire proof mesh in the air inlet of the smoke purifier first